Contact to Buy
Loading…
Part Number:
Model Number:
Shipping Weight:
Contact Us to Buy
Filters
Compatibility
Direct Drive Series
40mm ID Shaft
HD Series
Accessory Type
miscellaneous
Pin, Finger & Stud Plates
Adapters, Cones, Collets & Face Plates
HD Adapters & Cones
Shafts, Hubnuts & Pressure Drums
Show Results
Clear All
Please Fill the Search
Not found, try searching for another query
Searching…
Direct Drive Series
40mm ID Shaft
HD Series
Other
More Filters
No Accessory Found
Loading…
Please click the search button to view results
2″ Spacer Plate – For Model 6401 / 6450 Quick View 6401/6450 Spacer Plate
Adapter – Speedy Dayton – For Heavy Duty Balancers Quick View Dayton Wheel Balancer Adapter
For Heavy-Duty Balancers. Optional accessory kit for the 8110785 adapter. Allows for mount of 22″ and 24.5″ Dayton style demountable rims. Quick View Dayton Adapter Extension Kit
Cone, Truck – 4.52″ to 6.95″ Center Holes – For Model 6401 / 6450 Quick View 6401/6450 Truck Cone 4.52-6.95″ Center Holes
Cone, Large – 2.98″ to 5.06″ Center Holes – For Model 6401 / 6450 Quick View 6401/6450 Large Cone 2.98″-5.06″ Center Holes
Cone, Small – 2.44″ To 3.12″ Center Holes – For Model 6401 / 6450 Quick View 6401/6450 Small Cone 2.44″-3.12″ Center Holes
The Coats® 525 Wheel Lift helps you elevate heavy tire and wheel assemblies up to the appropriate height with minimal effort. This lift system reduces operator fatigue and the potential for expensive wheel damage, while providing a sliding platform for easy operation and smooth, air-powered scissor lift action. The 525 Wheel Lift is compatible with all 1300, 1400, 1500 and 1600 Direct Drive wheel balancers. Quick View 525 Wheel Lift
Quick Nut Kit Quick View Quick Nut Kit
Premium Slide Nut, 2 Jaw, 40mm, Nut Only, fits standard pressure cup. Binary thread engagement stays fully open during installation, eliminating wear from dragging the teeth across the balancer’s threaded shaft. Quick View Premium Slide Nut
40mm / 8mm manual hub nut for standard thread pitch Quick View Hub Nut
Forged steel hub nut with bearings Quick View Premium Hub Nut
Nut-Slide, 2 Jaw, 40mm, Nut Only – From 2-Jaw Slide Nut Kit 85009998 Quick View 2-Jaw Slide Nut Only
40mm, with pressure cup. For use on 700-1250 models with 40mm shaft Quick View 2-Jaw Slide Nut Kit
XL Pressure Drum, 40mm I.D., 8.375ö O.D., with rubber lip Quick View XL Pressure Drum
Toyota Truck Kit with Fixed Finger Plate and 2 Direct Fit Offset Plates (5×150 and 6×5.50) Quick View Toyota Adapter Kit
Toyota Offset Adapter (5×150)- 40mm I.D, included in 85009945 Toyota Adapter Kit Quick View Toyota Offset Adapter (5×150)
Toyota Offset Adapter (6×5.50), 40mm I.D, included in Toyota Adapter Kit 85009945. Quick View Toyota Offset Adapter (6×5.50)
40mm back cone spring Quick View Back Cone Spring
Cone, Small, Std. A, 40mm I.D., Range: 1.75-2.25″ (44.45-57.15mm) Quick View Cone, Small, STD. A, Range 1.75-2.25″ (44.45-57.15mm), 40mm I.D
Medium Cone 2.44″-3.15″From In-Between Set, 40mm Quick View Medium Cone 2.44″-3.15,” In Between Set, 40mm
Small Cone 2.05″-2.76″ from In-Between Set, 40mm Quick View Small Cone 2.05″-2.76,” In Between Set, 40mm
Miniature Cone 1.62″-2.33,” from In Between Cone Set, 40mm Quick View Miniature Cone 1.62″-2.33,” In Between Set, 40mm
In-Between Cone Set comes with 4 cones – minature, small, medium, large. Supplemental set for wheels with shallow wheel centers. Shallow cone angles provide more accurate mounting. Example vehicles requiring these cones include Ford Edge and Chevy Malibu Quick View In Between Cone Set (4) 40mm
Short Cone for Wheel Balancer, 40mm i.d., Range 2.650″ – 3.025″ (67.31-76.84mm) Quick View Short Cone, Range 2.650″-3.025″ (67.31-76.84mm), 40mm I.D
40mm Special Applications Light Truck Cone 3.29″ – 4.47″. Quick View Special Applications Light Truck Cone (3.29″-4.47″)
Cone, Light Truck, Std. D, 40mm I.D., Range:3.375-5.00″, (85.73-132.08mm) Quick View Light Truck Cone, STD. D, 3.375″-5.00″ (85.73mm-132.08mm), 40mm I.D
Light truck back cone spacer, For Coats 775/875/1175 Balancers. Allows back coning of wheels with up to 5.20″ (132.08mm) center-holes Quick View 775/875/1175 Light Truck Back Cone Spacer
Light truck back cone spacer allows back coning of wheels with up to 5.20″ (132.08mm) center-holes. For Coats Balancers (NOT for use on 775/875/1175). Quick View Light Truck Back Cone Spacer
Double Sided Low Angle Collet Kit 40mm covering wheel center bore range from 2.04″- 5.20″ (52mm – 132mm) fits the majority of passenger car and light truck wheels. It aids the technician in replicating the vehicle mounting by more closely matching the center bore of the wheel for a performance balance. Quick View Double Sided Low Angle Collet Kit Range 2.04″- 5.20″ (52mm – 132mm), 40mm
Double Sided Collet – Range 4.49” – 5.20” (114 mm – 132 mm), 40mm. A new retaining cradle helps prevent large, heavy assemblies from damaging balancer shaft during demount process. Quick View Double Sided Collet (13-16) Range 4.49″ – 5.20″ (114mm – 132mm), 40mm
Double Sided Collet (9-12) Range 3.66” – 4.49” (93 mm – 114 mm), 40mm Quick View Double Sided Collet (9-12) Range 3.66” – 4.49” (93 mm – 114 mm), 40mm
Double Sided Collet (7-8) Range 3.26″-3.69″ (83mm-94mm), 40mm Quick View Double Sided Collet (7-8) Range 3.26″-3.69″ (83mm-94mm), 40mm
Double Sided Collet (5 and 6) – Range 2.85″ – 3.28″ (72mm – 83mm), 40mm Quick View Double Sided Collet (5-6) Range 2.85″-3.28″ (72mm-83mm), 40mm
Double Sided Collet (3 and 4) – Range 2.45″-2.88″ (62mm-73mm), 40mm Quick View Double Sided Collet (3-4) Range 2.45″-2.88″ (62mm-73mm), 40mm
Double Sided Collet (1 and 2) – Range 2.04″-2.47″ (52mm-63mm), 40mm Quick View Double Sided Collet (1-2) Range 2.04″-2.47″ (52mm-63mm), 40mm
The Coats® Double Sided Mazda Collet, built with hardened steel and designed with a low angle, provides the tire technician with a durable and precise mounting method that replicates the mounting of the wheel on the vehicle resulting in performance balance that’s done right the first time, every time. Quick View Double Sided Mazda Collet
5 finger adjustable pin plate design provides fast and easy clamping of tire and wheel assemblies and prevents damage to alloy wheels. Can be used on any 40 mm wheel balancer. Combines 15 plates into one convenient solution. Quick View 5 Lug Adjustable Pin Plate
4 finger adjustable pin plate design provides fast and easy clamping of tire and wheel assemblies and prevents damage to alloy wheels. Can be used on any 40 mm wheel balancer Quick View 4 Lug Adjustable Pin Plate
3 finger adjustable pin plate design provides fast and easy clamping of tire and wheel assemblies and prevents damage to alloy wheels. Can be used on any 40 mm wheel balancer Quick View 3 Lug Adjustable Pin Plate
One, reliable system that combines 15 plates into 1 to properly balance a wide variety of tire and wheel assemblies. The adjustable design provides fast and easy clamping of tire and wheel assemblies. Can be used on any 40mm wheel balancer Quick View 3,4,5 Lug Adjustable Pin Plate Set
Hole Gauge for Pin Plates Quick View Hole Gauge for Pin Plates
Pin-Finger, Set of 6, for Toyota Trucks, Pin OD 1.125″, tip OD 0.5″, Fits Fixed Finger Plates. Quick View Toyota Truck Pin-Finger Set of 6
Designed to measure the rim width for the balancing process. Quick View Calipers
Great for removing old Tape-A-Weights from wheels. The tool’s beveled edge also lifts old weights and pops them off the rim. Quick View Tape-A-Weight Scraper
Spacer No Mar, Plastic. Quick View Plastic No Mar Spacer
No Mar Ring Quick View No Mar Ring, 40mm
40mm No Mar Ring used with fixed or Adjustable Pin Plates Quick View No Mar Ring Spacer
The hammer will work on any style clip on wheel weight – lead, zinc, and steel. Its anti-marring face is safe for steel, aluminum, and chrome wheels. Quick View Wheel Weight Hammer
